 |
|
Direct contact T +31(0)543 461629 F:+31(0)543 461786 |
|
|
|
|
|
BEELE Engineering supplies a range of products for passive fire safety and evacuation safety that is both diverse and comprehensive.
Each and every product is the result of in-house research and development. Hence our products possess a unique combination of advanced skill, quality and practical know-how. |
BEELE Engineering products (in alphabetical order) are:
|
|
|
SLIPSIL |
NOFIRNO |
||
|
SLIPSIL, the new generation sealing plugs developed by BEELE Engineering, is designed to provide fire safe and gas and water tight seals for transits carrying single or multiple plastic or metal pipes.
Due to the new design much wider tolerances of ducted pipes and conduit sleeves can be adopted.
|
Optimized gas and water tightness is obtained by using the SLIPSIL sealing plugs in CSD embedded or flanged pipes. Using SLIPSIL offers advantages for the builder, the installer and the owner of the installation. The innovative design of the plug allows the shortest possible sleeve length for fire rated penetrations, and therefore reduces welding and cutting time.
With SLIPSIL the necessary insulation is reduced to an absolute minimum, while the plug can be used for all types of metallic and plastic pipes. That simplifies material handling and reduces the costs of storage. Installing the plug is extremely simple.
The SLIPSIL plugs can be installed in minutes and do not require any bolting or other mechanical outfitting. SLIPSIL plugs cause no mechanical stress and avoid corrosion problems. That offers owners of ships or buildings the possibility to save on maintenance costs.
Visit our website: www.slipsil.com for a complete presentation.
|
SLIPSIL sealing plugs are made of the advanced rubber grade NOFIRNO. This rubber is halogen free, does not harden during service life, has outstanding weathering properties, does not shrink during fire exposure, has an oxygen index of 55% (>30 is flame retardant) and a low smoke index.
NOFIRNO rubber can be used in a very wide temperature range from -50° C up to +180° C. That means that with one rubber grade almost all sealing conditions can be covered now. Numerous fire tests have shown that the rubber NOFIRNO plugs withstand fire and thermal loads without showing dramatic colour change or carbonization at the unexposed side. At the exposed side the rubber will NOT be consumed by the fire due to the protective layer and char formed. This means that the plug stays in place there.
NOFIRNO rubber is traceable to prevent counterfeiting and to guarantee users that they get the CSD quality they expect.
NOFIRNO - Optimum fire safety guaranteed.
Visit our website: www.nofirno.com for a complete presentation.
|
|
ACTIFOAM |
FIRSTO |
||
|
ACTIFOAM is a fire resistant foam rubber that is used in the building industry, ship construction and the installation sector.
The material expands on the basis of enclosed air and for that reason it is classed as non-intumescent.
ACTIFOAM enables firestops to be installed speedily, simply and effectively.
|
Its areas of application are:
Visit our website: www.actifoam.com for a complete presentation.
|
FIRSTO Firestop is one of the most important applications of ACTIFOAM foam rubber, and it is specifically suitable for the fire resistant ducting of cables and/or cable trays through wall and floor penetrations.
FIRSTO possesses all of ACTIFOAM's functions, i.e.
Visit our website: www.firsto.com for a complete presentation.
|
|
RISE |
RISWAT |
||
|
RISE is the fire resistant sealing system of choice for cable and pipe penetrations. Fast and simple to install with its smart system design and extremely limited number of component parts. Future enlargements can be effortlessly completed with RISE. It's not for nothing that many shipyards world-wide call RISE the RAPID TRANSIT SYSTEM.
The severity of testing undergone world-wide by the RISE system is unmatched by any other system. On this basis it has been awarded certificates guaranteeing optimized fire safety. In the light of this extremely tough test programme the US and British navies have approved the RISE system for application on board of their vessels. |
The RISE extension frame can be supplied for the purpose of 'upgrading' existing installations to the RISE system. This frame not only improves fire resistance but also creates a substantial improvement in ducting capacity.
Visit our website: www.rise-systems.com for a complete presentation of the Rapid Transit System. |
The RISWAT system is used to provide water and gas tight seals for transit openings carrying multiple cables and for ducting pipes that have to be able to move in all
directions.
Visit our website: www.riswat.com for a complete presentation of RISWAT.
Software The calculation software for RISE, RISE-NOFIRNO and RISWAT enables you to calculate the material requirements for providing cable and pipe penetrations with seals that are fire resistant as well as gas, water and smoke tight (RISE and RISE NOFIRNO) or water and gas tight (RISWAT).
Click here to order the software or click here to download the software directly.
|
|
BEESEAL |
CSD |
|
|
|
The BEESEAL system from BEELE Engineering is designed for the fire resistant as well as gas and water tight ducting of multiple different-diameter cables or pipes.
The system stands out by its flexibility and simplicity of use. Even the ducting of an extra cable is an extremely simple procedure.
|
CE-certified CSD sealing plugs are used for the fire resistant as well as smoke, gas and water tight ducting of pipes. The plugs are available in eight different rubber grades, including an EMC-safe type.
In addition to single sealing plugs, the range also includes multi-sealing plugs for 2, 3 or 5 same-diameter cables or pipes.
|
Installation of CSD sealing plugs is an extremely simple matter: simply lubricate and push in, that's it.
Visit our website: www.csdplugs.com for a complete presentation of CSD plugs.
Crusher Plug
CSD-SQ
|
|
LEAXEAL |
|||
|
|||
EMC |
ULEPSI |
YFESTOS |
|
|
RISE and CSD plugs are available in a special EMC design based on CONDUCTON technology, offering protection against electromagnetic impulses and interference.
|
The ULEPSI tank support is designed for application on board sea-going carriers for the transport of products which, for reasons of viscosity, have to be maintained at a high temperature (asphalt, coal tar, creosote, etc.).
The layered and compression-resistant construction ensures that the temperature is gradually reduced, in order to relieve strains caused by large temperature differences between the tank wall and sea-water.
|
YFESTOS 'glow-in-the-dark' evacuation route signposting products are able - independent of the electric power supply - to continuously absorb, store and in darkness emit
light.
YFESTOS stands out by its high level of luminosity and long-lasting light emission, properties that testing has shown to be retained for more than 20 years.
For a total overview of the YFESTOS range visit our website www.yfestos.com |
|
